Inert, Corrosion Resistant and Fouling Resistant Coatings
Metal filter corrosion and fouling can increase maintenance, reduce efficiency and contaminate product flow paths. Additionally metal fritted filters commonly used in analytical and lab applications adsorb reactive flow path samples, causing test failures and inconsistent test results. SilcoTek® high temperature CVD coatings, like Dursan® and SilcoNert®, prevent the interaction of process fluids and test analytes with the metal filter surface, reducing fouling, corrosion, contamination, and sample adsorption.
Will the coating block or obstruct the filter? No, our coating won't plug filter media because our precision CVD deposition process distributes the coating without blinding of the filter surface or significantly impacting filter efficiency. A cross section of a precision coated filter (below) shows coating throughout the filter without blocking the pores.
Want to learn more about how we coat metal filters and sintered metal frits? Read our Technical Insight.
The benefits of an inert, corrosion resistant and fouling resistant coating.
Get all the information about the benefits of SilcoTek coated flow paths.
Process fluids can cause corrosion, prematurely foul filters and can result in frequent and costly filter replacement. SilcoTek coatings offer superior corrosion and fouling resistance at a low cost, eliminating the need for super alloys or exotic treatments. Applications include:
Dursan offers superior performance and durability, while maintaining dimensional tolerance. Dursan does not significantly impact filtration efficiency while improving durability and life.
demonstrates Dursan's corrosion resistance. Coated and uncoated 316L stainless steel coupons were exposed to concentrated salt spray for over 8700 hours. The uncoated coupons show extreme stainless steel corrosion.
The Dursan® coated coupons show no corrosion, demonstrating that Dursan coated surfaces will continue to perform under extreme salt environments.
Our low surface energy (high contact angle) fouling resistant surface combined with a low coefficient of friction help to extend filter life . Comparative testing shows the Dursan® coated surface improves lubricity by 36% over stainless steel while reducing surface energy by up to 8x.
SilcoTek® coatings reduce buildup on critical flow paths, preventing fouling and improving efficiency. (Data Credit: Oltin, Venkataraman, Eser; Pennsylvania State University; "Analysis Of Solid Deposits From Thermal Stressing Of JP-8 Fuel On Different Surfaces On A Flow Reactor", University Park, PA.)
shows the Dursan® coated surface reduces wear by over 50% compared to uncoated stainless steel.
Because metal fritted filters have a large surface area, they can be a significant source of reactivity and sample adsorption. That's why it's critical to prevent interaction of the filter with the sample. Many deactivation technologies can clog or blind filters and do not offer the inertness needed for today's trace sampling needs. SilcoTek coatings like Dursan® beat other industry deactivation technologies and inert surfaces while not clogging or blinding the filter.
The chart below compares the breakdown/loss rate of various deactivations. The Dursan coating minimized sample breakdown, improving filtration and sampling results while offering a high temperature stable, high durability surface. Get our ultimate guide to inert sampling and learn more about how SilcoTek coatings improve sampling performance.
Watch our coating demonstration videos to see how our coating technology improves performance and learn about our company.
If you have a technical question about how our coating technologies will perform in your application, contact our Technical Service Team and ask the experts.
If you would like to buy a coated product directly from the manufacturer, go to our Buy Coated Products page.
To get the most out your system or process, coat the metal filter and housing.
Want to test our coating before you buy? Get a free test coupon or arrange for a free test evaluation.